13ft 1" Manual Retractable Awning with Full Protective Hood - Terracotta

Code: Awning273A
13ft 1" Manual Retractable Awning with Full Protective Hood - Terracotta
AWNING_WIDTH 4.0m (13ft 1")
AWNING_MAX_PROJECTION 3.0m (9ft 10")
AWNING_COLOUR Terracotta
AWNING_FABRIC 300gsm Polyester

Our awnings combine excellent quality with superb value for money

Our full cassette awnings are heavy duty awnings, ideal for both residential and commercial use, including shops and pubs. They combine contemporary design with superior quality and great value for money. Finished to a very high specification, they have a strong powder coated aluminium frame with retractable arms containing coated steel cables. Full cassette awnings are the strongest of all of our awnings. The integrated gutter in the front bar also allows water to run off easily.

The awning can be opened and closed easily and smoothly using the winding handle on the left hand side (see pictures to the right). It can be opened as much or as little as you like up to the maximum projection. The awning is adjustable to enable you to alter the slope of the awning from almost horizontal to a relatively steep tilt of approximately 15 - 30 degrees from the horizontal. The valance (frilly bit can be detached if preferred).

Please note an electric version of this awning is also available. Use the Awnings Quick Find on the left hand menu.

'Full cassette' means that the awning retracts into a metal cover for complete protection. Note: Valance will be left exposed.

Aluminium roller: Diameter 78mm
Aluminium front bar: 120mm x 64mm
Aluminium support arms: 59mm x 31mm, 51 x 26mm

 
Customer Reviews

Average Rating: 4.5/5 (2 reviews)

Rating: 5/5

"Easy to install good instructions"

Reviewed Sunday, July 23, 2017

Rating: 4/5

"The supplied bracket fixing bolts and the type of brick in my wall seemed incompatible. The technical help provided by Primrose was excellent and steered me to a resin fixing system, which I used. The bolts provided were not suitable for resin fixing so I made new ones from screwed rod, and bought a load of stainless steel nuts. The bolting instructions on the leaflet stated two dimensions for the depth of the wall drilling 80 mm or 90 mm. I went for the deeper one."

Reviewed Monday, August 4, 2014

question mark

Other people looked at

 
1 to 6 (of 6 products)    View all        1